Durability and Performance
Two independent studies show the use of Bioni exterior coatings (Perform & Roof) can save up to 38.1% on bill to bill energy savings, and help prevent the aging process.
Bioni exterior coatings help reduce a buildings thermal load and aging process significantly.
- Applying Perform white, Perform flora 22, Perform sol 02, and Perform terra 20 on the building exterior can result in a decrease in cooling loads by 38.1%, 35.9%, 33.7% and 27.9% respectively
- Classification by University of Athens (Building Physics Department): “COOL PAINT”
Assumptions and measurements:
- Top floor apartment of 100 sq./m in Singapore
- Annual electrical energy saving = 38,952.8 / 2.49 = 15,643.7 kWh
- Based on SP Services December 2009 electricity rate = 22 cents per kWh the annual electricity cost saving is = 15,643.7 x 0.22 = $ 3,442
Download reports here:
Download – Bioni Perform Energy Saving & Anti-aging Report (Centre of Innovation in Environmental & Water Technology)
Download – Energy Savings Test Report (University of Athens)
Let’s face the facts! The food & beverage processing industry deals with threats of bacteria contamination and mold every day. Most of these facilities are taking every measure possible to prevent the costly contamination. The problem is these facilities are perfect environments for microbes to survive and thrive due to high moisture and all the nutrients that bacteria and mold needs to grow.
There has never been a true solution that works for walls, ceilings, and doors other than costly cycles of cleaning and constant refurbishing of the substrates.
To put it simple, Bioni can drastically help eliminate and prevent these problems and help save money.
How does Bioni save money?
From the start Bioni’s goal was to specifically design a coating for the exact environments in the food and beverage processing industry and help solve an industry pain.
As a coatings industry first, Bioni Systems offer a permanent protection on the coating film against deadly bacteria (e.g. Listeria, E. Coli, MRSA) as well as harmful mold and mildew for the entire life of the coating.* Due to Bioni’s superior durability and the ability to apply the system over existing mold and rust “yes you can apply Bioni System over mold and rust“, having Zero VOC (Volatile Organic Compound) and no odor, Bioni System reduces downtime through less preparation, shorter application time, and the ability to apply in occupied areas. Bioni also helps significantly reduces costly cleaning cycles, is permanently moisture regulating and provides an opportunity to reduce insurance costs as well as helps prevent expensive fines levied by government agencies. Bioni has the highest Class A non-flammability (ASTM E84), 0 flame spread, 5 smoke development and improves factory appearance while sustaining look and performance without having to rebuild or coverup (rebuilding/renovation does not prevent the problem from happening again). All of this helps one very important thing as well, production time.
Bioni coatings have a US patent (US #7736423).
More info – System Food
or Call toll free – (888) 717-4517
*Bioni System Food provides anti-microbial properties to prevent the growth of microbes on the paint film only. The anti-microbial properties do not protect food, beverages, users or others against bacteria, germs or mold spores and do not substitute hygiene measurements and practices.